Audurra Electric Random Orbital Sander

An Electric Random Orbital Sander for professionals! The Electric Random Orbital Sander has Seven preset Maximum Speeds (4,000, 5,000, 6,000, 7,000, 8,000, 9,000 and 10,000 / min (RPM). The Maximum Speed can be changed at any time while the Sander is running or when it is stopped. Any setting for the Maximum Speed will be stored while the Power is turned “OFF”. The Audurra Electric Random Orbital Sander is significantly more quiet than pneumatic sanders. Using electric sanders reduces the noise level in the entire body-shop, making a more comfortable working environment for the employees. Electric sanders also lower energy costs by not consuming expensive compressed air. Closed construction design prevents dust from fouling the motor, extending the motor life. The sander is able to monitor and maintain the preset Maximum Speed as user downforce increases or decreases during use. During periods of overly high user downforce, the Sander will flash the LED on the back of the tool from Green to Red and cause the motor to slow slightly as a warning to the user. Continuous downforce should be no greater than approximately 5 kg (11 lb.). If the user continues with overly high downforce, the Sander will change the LED to solid Red and stop. The sander has the ability to monitor temperature of the internal electronic systems and can shut the tool down when temperature reach damaging levels. The Audurra Electric Random Orbital Sander is equipped with a vibration absorbing “comfort grip” which reduces hand fatigue.